• slider image 58
:::

2019-05-14 用站長工具箱急救版來度過升級難關

為什麼會有這篇文章?簡單講,2019/05/09的升級算是一場災難,有興趣的可以看一下:https://www.tad0616.net/modules/tadnews/index.php?nsn=282如果你已經升級,而且掛了,請按照那篇的方法,手動下載解壓上傳來處理即可。 如果您還沒升級,那恭喜,現在您有方法可以不用再手動下載解壓上傳(畢竟要開FTP軟體也是蠻煩人的,有時候還可能被防火牆擋在外面...) 在此之前,再次提醒:PHP 5.3.x(含)以下,請直接轉台,就別升級了,直到您的主機 PHP 是 5.4 之後再說。還有那些PHP及格,但 XOOPS 2.5.7(含)以下 的也一樣,請直走右轉離開。等到您的版本升到2.5.9以後再來進行以下升級... 剩下來的,如果PHP是5.4以上且XOOPS 2.5.9以上者,那麼,只要按照以下建議做即可(一定要按照順序) 先用正常的 tad_adm 站長工具箱安裝 tad_admin 站長工具箱(急救版) 然後再利用tad_admin 站長工具箱(急救版)依序更新: 升級tadtools(所有新架構模組的基底) 升級tad_tad(新架構的站長工具箱,以後還是得用他來做升級或急救) 升級tad_login(不然前台顯示可能會有問題) 升級其他所有模組。 更新tad後台(沒更新的話,升級到XOOPS2.5.10後會一片空白) 到「升級XOOPS」→安裝BootStra4補釘→升級XOOPS 2.5.10 這樣就能安然度過卡關危機...至於這個tad_admin 站長工具箱(急救版)以後還會不會用到呢?很難說,留著無妨,移除亦可。 

2019-05-09 2019/5/9 後的更新不再支援 PHP5.3 及 XOOPS2.5.7.x

先說明一下狀況,因為 XOOPS 2.5.10起,採用新的xmf框架(總之就是某種新的模組開發框架)因此,小弟也將所有模組更新為新框架,這是這一波新釋出模組的背後原因。(此外提醒一下,這一波更新5/9起,所有模組不再支援 PHP5.3,也不支援 XOOPS 2.5.7.x(含) 以下版本裝了會掛掉的....)不過,有個比較麻煩的問題是tad_adm(站長工具箱)和tadtools (工具包) tad_adm 站長工具箱是用來進行線上安裝更新以及急救用的工具(在此呼籲一下,「訪客」一定、務必要有「站長工具箱」的「模組使用權」,否則就無法急救了) tadtools 則是所有模組共用的工具、函數、物件都會放在這裡,以便縮小各模組體積,也不用重複的東西一直安裝好幾次。在這一波更新中,只要是用線上安裝,不管您如何安裝,都會產生一些問題,這裡有詳細說明及解法:如果還沒升級的,網站也還活的好好的,請先看這篇:用站長工具箱急救版來度過升級難關 如果您先更新了 tadtools,那麼會造成tad_adm中有幾個函數和tadtools衝突,導致tad_adm無法使用。解決辦法:手動下載 tad_adm ,解壓、上傳,覆蓋 modules 下的 tad_adm 即可。 如果您先更新了 tad_adm,那麼會因為 tadtools 還沒更新成新架構,缺少某些物件,導致tad_adm一樣無法使用。解決辦法:手動下載 tadtools ,解壓、上傳,覆蓋 modules 下的 tadtools 即可。 如果以上兩者都更新了,前台卻無法登入,那就是 tad_login 沒有更新,因為 tad_tools 需要引入新版 tad_login 中的某個檔案 。解決辦法:線上更新 tad_login 即可 當我升級XOOPS 2.5.10後,發現整個後台變空白!這是因為 tad 後台少了一個定義的關係。解決辦法:手動下載 tad 後台 ,解壓、上傳,覆蓋 modules 下的 system/themes/tad 即可。那有沒有比較無痛的升級建議方式呢?線上的方式:用站長工具箱急救版來度過升級難關 手動的方式: 如果主機的PHP版本是PHP5.3以下,那麼,在想辦法升級到PHP5.3以上的版本前,都不建議您做任何更新。 如果PHP5.3以上,但XOOPS是2.5.7.x(含)以下的版本,請先升級到 2.5.9(先別急著升級到最新的XOOPS 2.5.10) 升級完畢後,先手動下載 tadtools、tad_adm、tad_login,然後上傳到modules下覆蓋原目錄 接著再用線上更新的方式,更新 tad 後台等其他新模組, 最後再升級 XOOPS 2.5.10這樣應該是最順利的流程。

2019-01-01 基於資安考量,請儘快更新所有模組

各位親愛的同胞們大家好~於2019/01/01小弟釋出了30個更新,其中包含了28個模組、一個tad後台以及一個school2019新佈景這次的更新其實只是為了讓XOOPS及所有模組都能支援BootStrap4,以便讓版面可以更美觀,更容易調整,在行動裝置上也更容易使用。就在釋出前夕,小弟被一個優秀的國三小弟弟劈劈啪啪的打臉了,因為咱們這位厲害的小朋友找出了一堆藏在深處的漏洞這些漏洞都還蠻大洞的,有點能力的黑客,都可以利用這些漏洞自由自在的在貴站安裝各式華麗的後門並邀請五湖四海的朋友門到貴站裡頭四處逛,拿拿資料,看看個資所以呢~如果並不想把網站資料都與好朋友門分享的話請儘速更新所有模組吧~剛好在釋出前夕都有把這些被找到的洞給補上了。當然,未來我會陸續再把各個模組的安全性再寫得更完善一點,因此,也別忘了隨時更新。此外,這次更新還有一些特色一、線上升級XOOPS例如站長工具箱已經支援線上升級XOOPS了...可以一鍵直升XOOPS2.5.9(PHP版本允許的話)按下後,記得依序按照畫面指示步驟完成升級,千萬別關掉小視窗。萬一不小心關閉了,請自行輸入「http://網址/upgrade」完成升級萬一升級後發現後台模組界面一片空白,那表示樣板不見了(或者沒完成system更新)。請自行輸入「http://網址/modules/system/admin.php?fct=modulesadmin&op=update&module=system」來完成system更新二、一鍵補丁一鍵補丁指的就是針對系統做一些優化或加薪功能,例如讓XOOPS原生的表單也可以支援BootStrap4如果升級完BootStrap4後,發現後台按鈕變得很大,請安裝專屬的tad後台(一樣線上安裝即可)如果沒有要使用BootStrap4,想維持BootStrap3,那還需要按嗎?可以按,有此功能不代表一定要使用該功能。目前也只有將預設佈景設為School2019時才會真的切換到BootStrap4,否則仍都以BootStrap3來運作。三、新的school2019 佈景另外,新的 school2019 佈景有特別針對三欄式畫面做優化,以前用三欄式時,中間主內容區總覺得太小,現在,您可以隨意調整大小了。不過要特別注意的是,若是系統還不支援BootStrap4(沒有安裝BootStrap4補丁的話),千萬別將預設佈景換成School2019,否則會有災難性的下場...此外,school2019 佈景未來還會有更勁爆的功能,這點就稍稍賣個關子,以後釋出就知道了。更新後,如果有發現任何問題,歡迎隨時反應小弟會盡量在第一時間處理,祝大家使用愉快~

2016-10-20 更新tad_login快速登入後,網站掛了怎麼辦?

嗯...因為facebook的API不斷更新,所以,利用facebook登入的方法也必須隨支調整,否則到十月底可能就無法使用了,因此,在前兩天有重新改寫了 tad_login 中 facebook 快速登入的部份。由於變動蠻大的,所以,預期更新後應該會有哀鴻遍野的狀況...首先,如果您的 PHP 是 5.4 以下的,也就是 5.3.x 或更舊的,那麼,建議您,直接到 tad_login 的偏好設定,先取消 facebook 就好,因為PHP版本太舊是沒救的,網站就直接死給你看,facebook官網提供的SDK至少就是 PHP 5.4 起跳。如果您的 PHP 是5.4以上,那恭喜您,只要確定也有更新到tadtool最新版,接著只要到 https://developers.facebook.com/apps 去,照著後台說明重設一下就好(補一些缺少的資料)。如果您的 Facebook API 是2.1或 2.2 的(從FB的主控台就看得到),那建議您直接刪除該應用,接著照著後台說明重設一個新的,因為從 2.1是無法升級到新的版的API的取得新的編號及密鑰後,到XOOPS的tad_login後台編號設定重新輸入編號及密鑰,這樣就一勞永逸啦~不...應該說至少可以撐個幾年吧。如果您的主機 PHP 是 5.4 以下,但又非得用 facebook 登入不可的話,那麼,請移除最新版 tad_login,然後至 http://120.115.2.90/modules/tad_modules/index.php?module_sn=24 下載 4.2版,自己解壓縮手動上傳安裝即可。只是能用到什麼時候,我就不敢確定啦!  

2016-10-11 test

test

2016-06-29 eguide 模組就別再用了...有資安問題

eguide 是一個很早期的活動報的模組,印象中是日本人寫的,現在應該沒有在維護了。日前已經有SQL隱碼攻擊的漏洞被發現(底下這些都是),所以,請小心。http://www.wooyun.org/bugs/wooyun-2010-0200408http://www.wooyun.org/bugs/wooyun-2010-0200390http://www.wooyun.org/bugs/wooyun-2010-0200144http://www.wooyun.org/bugs/wooyun-2010-0200000若一定要用的話,建議使用 geek01大所修改的版本,雖然不確定漏洞是否有補上,但至少是有在維護的感覺~XDhttps://geek0001.wordpress.com/2014/03 ... guide-bootstrap%E5%8C%96/

2016-06-29 fred_honor 榮譽榜有資安問題

fred_honor 榮譽榜是許多學校使用的榮譽榜模組,不過,日前也被發現有漏洞了。由於該模組也許久沒有更新維護,所以,在此也不建議使用。底下是被揭露的資安訊息:http://www.wooyun.org/bugs/wooyun-2010-0159689在此建議改用 tad_honor 榮譽榜http://120.115.2.90/modules/tad_modules/index.php?module_sn=66或者直接拿 tadnews 開個「榮譽榜」分類也都是很常見的用法。

2016-06-29 請更新 tadnews 和 tad_book3 模組

底下是兩個被注入的案例:http://www.wooyun.org/bugs/wooyun-2010-0177597http://www.wooyun.org/bugs/wooyun-2010-0198629雖然無法確定這兩個網站使用的模組版本(就是有人抵死或裝死不更新啊...),但還是全面檢視了一次變數過濾的問題,並將一些變數過濾的方式改得更嚴謹一點。所以,請儘速使用 tad_adm 來更新這兩個模組。或至 http://120.115.2.90/index.php 下載最新版模組實際上,只要有模組或佈景是呈現紅色的按鈕,那都務必養成立即更新的好習慣!開發者並不會閒閒沒事幹弄個更新來讓大家按阿... 

2016-05-27 XOOPS 2.5.8 正式版出爐了!

特色:支援 PHP7,內含 XMF,安全性升級,密碼更安全!此版本修正了許多臭蟲並強化功能!您可以從 XOOPS/XoopsCore25 或 XOOPS Core (stable releases)/XOOPS_2.5.8 下載 XOOPS 2.5.8 正式版。若想下載中文版,可以從這裡下載:http://120.115.2.90/modules/tad_uploa ... e25-2.5.8_tw_20160529.zip特別注意: XOOPS 2.5.8 需要資料庫能夠完整支援 MySQLi,詳情請參考「升級須知」。環境需求PHP 最低需 5.3.7,比較建議的版本是 5.5以上,因為 XOOPS 2.5.8 將是支援 PHP 5.3 和5.4 的最後一版。MySQL 必須在 5.0 以上版本 ,比較建議的版本是 5.5,也可以相容 MariaDB 資料庫。有問題請回報有任何問題或建議,可以直接到XOOPS的GitHub 建立一個 issue,也可以至 XOOPS 官網的討論區發問,當然至本站討論區反應也行。感謝感謝底下這些開發者的貢獻:- Angelo Rocha- Cédric MONTUY- cesagonchu- Dingjie Yang- elpaksu- hyp3rlinx- luciorota- mamba- Peekay- redheadedrod- slider84- timgno- wppd- xd9527- zyspec完整的修正紀錄請見 GitHub.安全性加強此版本修正了數個由 hyp3rlinx 回報的安全性問題,如 CSRF, weak password hash, 及 directory traversal 等。也修復由 Cédric MONTUY 回報的 potential privileged information disclosure 問題。密碼部份改用 PHP的 password_hash() function,同時也內建了一個函式庫以便那讓那些低於PHP5.5的主機也可以相容使用。新的 XMF 函數庫(詳見下方)也支援 JWT,將有助於運行 AJAX 及 REST 時安全性的提昇!支援 PHP 7PHP 的巨輪不斷向前滾動,最近釋出的 PHP 7 帶來巨大效能的改善,但同時也造成既有系統相容性問題。相當火紅的 Ubuntu  2016.04 LTS 內建就是使用 PHP 7,而 XOOPS 在這個版本也真被好與PHP7相容了!以往使用 mysql 函數庫來和 MySQL 資料庫結合的方式已在PHP7中被棄用。XOOPS 2.5.8 改用新的 mysqli 函數庫,任何資料庫的存取都呼叫內建的 XoopsDatabase 物件也已經改用新的 mysqli 函數庫 ,部份模組有直接使用mysql_函數的只能在PHP5下使用,在此也呼籲所有開發者儘早改成使用標準方式來運行!(Tad所有模組均已修改完畢!)另一個 PHP 7 的改變是 "所有E_STRICT通知已重新分類至其他級別",在先前的XOOPS版本中,當有啟用 debugging logger 時(關閉除錯時),E_STRICT 警告會被藏起來,而現在,這些將不再隱藏以便讓開發者可以知道有哪些問題需要修改。 我們已經試著確保 XoopsCore可以乾淨的運行,但部份早期的模組會產生一些您之前未曾見過的錯誤報告。自製的後台頁面佈景可能會有因為在 XoopsSystemGui::validate() 定義中存在已久的bug而出現問題。內建XMFXOOPS Module Framework 函數庫(即 XMF library)現在已經內建,並且用於核心的數個部份。XMF是一個給開發者使用的標準物件函數庫。在不久的未來它將會非常有用!它所有的 class 都會相容於下一個世代的XOOPS!開發者可以從 XMF Cookbook 學習更多相關內容,或許也會想看看這個範例:Xmfdemo module on GitHub.還有還有...IPv6 也從核心開始支援XOOPS 已經不再支援 Flash 橫幅,以改用HTML5取代之。許多的更新都已簡化並修正。升級須知由於資料庫部份有變動,所以,在首次安裝有新的需求,但若是從計有系統來升級的,請參考我們的建議來進行升級程序 請 完整備份檔案及資料庫內容。 (我們有做了許多測試,但還是小心為上!) 將解壓後 htdocs 下的所有檔案目錄上傳或複製到您的網頁目錄下 將解壓後 htdocs/xoops_lib 下的所有檔案目錄上傳或複製到您的原來的 xoops_lib 位置 將解壓後的 upgrade 目錄 上傳或複製到您的網頁目錄下 開啟瀏覽器輸入 http://您的網址l/upgrade/ 並按照畫面提示進行操作 登入網站,並至後台模組更新有顯示需要更新符號的模組。 移除 install 及 upgrade 目錄。至此,網站就能用囉!* 在 2.5.8 中有許多樣板有修改,所以,在上傳檔案到系統模組更新前,整個系統畫面可能會不太正常。所以,假如您因為某種原因導致沒辦法更新系統模組,您可以直接從瀏覽器貼上底下網址以更新之:http://您的網址/modules/system/admin.php?fct=modulesadmin&op=update&module=system* 請注意: 新密碼已經不相容較舊的 XOOPS ,在資料庫中,密碼已經不再使用原有機制,而是使用新的機制,因此,新的帳號會自動用新的機制,但舊的帳號可能就需要手動處理!因應 XOOPS 2.5.8的模組升級大部分的舊模組仍然可以相容 XOOPS 2.5.8,有許多模組也已經升級以相容2.5.8及PHP7(可參考 available for testing on XOOPS 2.5.8 and PHP 7),進一步詳情請參考 XOOPS 2.5.x Modules on GitHub.

2016-03-30 從A表取出資料來更新B表

我在現有的資料 `copy_xx_survey_main` 多了一個欄位叫做 `unit_title` (使用者所屬單位名稱)此欄位值可以從另一個資料表 `xx_users` 中的 `user_from` ( 使用者所屬單位名稱 ) 找到,所以,我希望可以將 `user_from` 的值塞入 `unit_title` 中。而 `copy_xx_survey_main` 和 `xx_users` 剛好都有紀錄`uid`(使用者編號)欄位,用以下語法就可以一行更新所有資料。UPDATE `copy_xx_survey_main`SET `unit_title` = (SELECT `xx_users`.`user_from` FROM `xx_users` WHERE `xx_users`.`uid` = `copy_xx_survey_main`.`uid`)WHERE EXISTS (SELECT `xx_users`.`user_from` FROM `xx_users` WHERE `xx_users`.`uid` = `copy_xx_survey_main`.`uid`); 

2017-01-01 XOOPS PHPMailer Security Patches Released

The XOOPS Development Team is pleased to announce the release of security patches for XOOPS 2.5.8 and XOOPS 2.5.7.2. These patches includes the latest version of PHPMailer to address a serious vulnerability. All XOOPS users are encouraged to update as soon as possible.Both full distributions and patch files (from the most recent prior release) for both the 2.5.7 and 2.5.8 series are available.Any users that are running older XOOPS versions are advised to update to XOOPS 2.5.8.1 now.Get XOOPS 2.5.8.1Release files are available on GitHub.The 2.5.8.1 files are also mirrored on the XOOPS File Repository on SourceForgeGet XOOPS 2.5.7.3Release files are available on the XOOPS File Repository on SourceForge

2016-11-29 XOOPS Website in transition

In the next few weeks the XOOPS Website will be very busy, with a lot of work happening in the front of you! Instead of making a secret out of it, and then creating a huge splash out of it, we've decided to just go ahead and make changes to the Website as we go.What is happening: 1) We are moving to PHP 7. Originally we were on 5.4, and this weekend we moved to PHP 5.6, as as soon as our host offers PHP 7, we'll be ready.2) We've also moved the Website to the latest XOOPS Core, so we can test it here before we officially release it.3) We are also updating all modules that are being used here, which will help us, of course with your help, to discover any bugs We have updated the NewBB Forums to the latest version, as well as News. We'll be converting soon the News to Publisher, as strategically that's what we want to invest our time in. And we'll be adding some new cool modules, like the one upcoming wgTimelines developed by Goffy from Germany. We'll transition our "XOOPS Innovators" and "XOOPSer of the Month" awards there. The work on the converting the "XOOPS Innovators" to the wgTimelines has already started - you can check it out herehttps://xoops.org/modules/wgtimelines/What else? We have moved modules developed by Wishcraft to one location on GitHub (read more here), so you can check them out, fork, and contribute back.We have also created one GitHub location for various XOOPS D3 modules. If you're curious what the D3 modules are, please read more hereOf course, we hope that you'll help us on this journey as we're moving closer to the next release of XOOPS And in case you were wondering, yes, we're looking for a new responsive theme for this updated Website! So if you would like to design a new theme for us, please let us know...

2016-10-03 10 Bootstrap Themes converted to XOOPS (Alpha release)

I started a conversion of 10 Bootstrap themes to XOOPS, but I'll need help from some of our XOOPS Design Experts! AnyarButterflyCompanyDayKnightMedicioMyResumeSailorSybarMagazineValeraI also played a little bit with Materialize, so maybe somebody can continue with it:https://github.com/mambax7/theme-xmaterializeIMPORTANT NOTE: This was only a "Proof of Concept" study about how quickly could we convert Bootstrap Themes to XOOPS. These themes are in ALPHA release, and will need some help from our XOOPS Designers before they become usable.Therefore please DO NOT use them on production sites. However, please fork them, improve them, and help us with development. AnyarDemo/Info Download/Development

2016-10-02 XOOPS GitHub Twitter Block added

If you would like to see what is XOOPS doing on GitHub, you can subscribe to our GitHub Twitter: https://twitter.com/xoopsgithubI have also added a block with recent tweets timeline:Our other Twitter Accounts:XOOPS News: https://twitter.com/xoopsnewsXOOPS Forums: https://twitter.com/xoops_forums

2016-09-13 MyMenus 1.52 Final, with Drag & Drop, Is Released

MyMenus 1.52 Final for XOOPS 2.5.8+ and PHP 5.5+ (incl. PHP 7) has been released - this release fixes issues with static methods discovered by Goffy. Thanks to Bleekk and the XOOPS Germany team, we have now "Drag & Drop" incorporated into MyMenus Module.In the picture above, you can see the links as bars that you can drag around to set the sorting, as well as the sub-links: Also incorporated are changes from Luciorota, who added an option to use skins from the theme.As always, it is great to see when developers are working as team and are helping each other! Download: GitHubIssues/Bugs: please report them directly on GitHubAs always, we encourage everybody to fork it and help us by contributing back to the development.Development: GitHubTutorial: GitBook You can contribute to the tutorial, as well as provide translation, on GitHub XOOPS Docs Check out XOOPS on GitHub: Let's Get involved!

2016-08-29 OnFocus 1.2, XOOPS premium theme

I'm very pleased to announce the availability of OnFocus 1.2, an advanced XOOPS premium theme.OnFocus is a magazine styled theme, based on xThemes and Common Utilities, and fully integrated with MyWords. This theme has a lot of features that allows to create stunning web sites easily.More Info View DemoFeatures:• Fully responsive.• Highly configurable• Based on bootstrap 3• Integrated with MyWords and xThemes• Support for video posts format (forget modules to handle videos)• Customizable news ticker• Customizable posts slider• Customizable navigation bars (topbar and main menu)• Multilevel main navigation bar• Popular box posts for home page• Featured posts in home page• 12+ homepage layouts combinations• Color customization in settings panel• Autoformat and autocrop images• 4 special blocks: twitter block, advanced posts, sidebar posts and about block.• Supports Google Custom Search and standard Xoops Search.• Redesigned templates for system modules (login, search, account, etc.)• Login box in navigation bar• Account box in navigation bar• A stunning landing page to use with QuickPages• Four custom templates for QuickPages• Support for custom backgrounds... and more.You can find more information and purchase options directly in Xoopstastic.com.

2016-08-29 Userlog 1.17 Alpha2 released for XOOPS 2.5.8 and PHP 7

We are happy to announce the UserLog 1.17 Alpha 2 module for XOOPS 2.5.8 and PHP 7 Description:Quote: Userlog is a node logger which can log your user/visitor activities in your site from a preferred node. This is a very useful tool for webmasters in busy sites. For example, you can log your other Admins navigation.Minimum Requirements:=========================XOOPS 2.5.8 PHP 5.5 MySQL 5.0If you find any bugs, please report them here, or directly on GitHub:https://github.com/XoopsModules25x/userlog/issuesAs always, we encourage everybody to fork it and help us by contributing back to the development.Download: GitHubDevelopment: GitHubTutorial: GitBook (just started - we need help!!!!You can contribute to the tutorial, as well as provide translation, on GitHub XOOPS Docs Check out XOOPS on GitHub: Let's Get involved!

2016-08-29 MyMenus 1.51 Final, with Drag & Drop, Is Released

Thanks to Bleekk and the XOOPS Germany team, we have now "Drag & Drop" incorporated into MyMenus Module.In the picture below, you can see the links as bars that you can drag around to set the sorting, as well as the sub-links: Also incorporated are changes from Luciorota, who added an option to use skins from the theme.As always, it is great to see when developers are working as team and are helping each other! If you find any bugs, please report them here, or directly on GitHub:https://github.com/XoopsModules25x/mymenus/issuesAs always, we encourage everybody to fork it and help us by contributing back to the development.Download: GitHubDevelopment: GitHubTutorial: GitBook You can contribute to the tutorial, as well as provide translation, on GitHub XOOPS Docs Check out XOOPS on GitHub: Let's Get involved!

2016-08-20 Release of xmcontent version 0.21

I am pleased to announce the release of xmcontent 0.21 final!Xmcontent is a simple content module for XOOPS. This module allows create content pages. The main point on the module:• Individual permissions for all contents.• Keywords (SEO) per content editable.• Description (SEO) per content editable.• Header and footer Customizable on the module home page.• Selection xoops editor.What's new in version 0.21:• Use a css file personalized by content (you can add a custom css to a content).• Use a template file personalized by content (you can add a custom template to a content).• The XOOPS search is integrated.• A short description of the content is available on the module home pageThis is only the beginning, if you have suggestions for future versions is here:suggestionsDownload: ReleasesBugs: IssuesThe modules are optimized to run on the 2.5.8 version of XOOPS, but it works on 2.5.7.Important: The templates use Bootstrap, so you must use a Bootstrap theme, e.g. xBootstrap that comes with XOOPS 2.5.8

2016-08-20 PingTrax 1.04 - Pingbacks +Trackbacks +Sitemaps

Chronolabs Cooperative... Presents ...PingTrax 1.04IntroductionPingTrax 1.04 is a module that uses auto discovery to generate links to send to PingLists as well as allow for Permalink's for trackbacks on all your public site! It has a plugin's system if you want to use it to customise your module input's into PingTrax but this isn't required to operate on the system.There is a smarty function which output a table for the permalink which is <{xoTrackbacks}> or <{xoTrackbacks dirname=$xoops_dirname}> this will output when you put it in your theme the permalink as well as any trackbacks that have been linked to the site.It utilises preloader events to maintain the pinglists as well as trackbacks; but it also generates your sitemaps as well in xml in the root and alters the robots.txt to reflect the sitemaps. This is all through auto discovery so there is very little you have to do to use this module in base mode. There is also in the the include folder 3 text files which are used in order to specify root names for Id's and identity tags in the $_GET path of the URL in case you need to do some basic customisation without having any knowledge of how to write a plugin's class.I have attempted too make this module fluid and dynamic so it is easy to implement! It will list your site on the web quickly and effectively, so please download and install it is for XOOPS 2.5.8 or later.Downloads ** xoops2.5_pingtrax_1.04.7z - 50.3k ** xoops2.5_pingtrax_1.04.tar.bz2 - 54.0k ** xoops2.5_pingtrax_1.04.zip - 92.5k ** xoops2.5_pingtrax_1.04.tar.gz - 62.2kBug ReportsThis is being released for testing purposes, the actual release will be in the news as version 1.04. If you have a bug please use the following form and report it:- https://sourceforge.net/p/chronolabs/tickets/new/

2019-01-16 Packaging alimentaire & design

Concevoir un packaging alimentaire est une discipline complexe qui englobe notamment le design graphique, le design produit & le design industriel. De facto, cela nécessite des expertises […]

2019-01-05 Qu’est-ce que le design graphique ?

Panneaux le long des routes, affiches dans les transports en commun, publicités dans les rayons des grands magasins, paquets de gâteaux, de bonbons ou de pâtes, le […]

2018-12-14 Nouveau design

Bonjour, Je suis heureuse de vous présenter mon nouveau site ainsi que mes dernières réalisations. J’ai travaillé dernièrement sur le design d’un site pour trouver ou prendre […]
:::

即時留言簿


計數器

今天: 133133133
昨天: 2161216121612161
總計: 1904622190462219046221904622190462219046221904622